A voltage scaling technique for energy-efficient operation requires an adaptive power-supply regulator to significantly reduce dynamic power consumption in synchronous digital circuits. A digitally controlled power converter that dynamically tracks circuit performance with a ring oscillator and regulates the supply voltage to the minimum required to operate at a desired frequency is presented. This paper investigates the issues involved in designing a fully digital power converter and describes a design fabricated in a MOSIS 0.8-/spl mu/m process. A variable-frequency digital controller design takes advantage of the power savings available through adaptive supply-voltage scaling and demonstrates converter efficiency greater than 90% over a dynamic range of regulated voltage levels.

In general-purpose microprocessors, recent trends have pushed towards 64 bit word widths, primarily to accommodate the large addressing needs of some programs. Many integer problems, however, rarely need the full 64 bit dynamic range these CPUs provide. In fact, another recent instruction set trend has been increased support for sub-word operations (that is, manipulating data in quantities less than the full word size). In particular, most major processor families have introduced "multimedia" instruction set extensions that operate in parallel on several sub-word quantities in the same ALU. This paper notes that across the SPECint95 benchmarks, over half of the integer operation executions require 16 bits or less. With this as motivation, our work proposes hardware mechanisms that dynamically recognize and capitalize on these "narrow-bitwidth" instances. Both optimizations require little additional hardware, and neither requires compiler support. The first, power-oriented, optimization reduces processor power consumption by using aggressive clock gating to turn off portions of integer arithmetic units that will be unnecessary for narrow bitwidth operations. This optimization results in an over 50% reduction in the integer unit's power consumption for the SPECint95 and MediaBench benchmark suites. The second optimization improves performance by merging together narrow integer operations and allowing them to share a single functional unit. Conceptually akin to a dynamic form of MMX, this optimization offers speedups of 4.3%-6.2% for SPECint95 and 8.0%-10.4% for MediaBench.

Streamlining communication is key to achieving good performance in shared-memory parallel programs. While full hardware support for cache coherence generally offers the best performance, not all parallel machines provide it. Instead, software layers using Shared Virtual Memory (SVM) can be built to enforce coherence at a higher level. In prior work, researchers have studied application-specific cache coherence protocols implemented either in SVM systems or as handlers run by programmable protocol processors. Since the protocols are specialized to the needs of a single application, they can be particularly helpful in reducing the long latencies and processing overhead that sometimes degrade performance in SVM systems. This paper studies implementing application-specific protocols in hardware, but not via an instruction-based protocol processor as is typical. Instead, we consider configurable implementations based on Field-Programmable Gate Arrays (FPGAs). This approach can be faster than software-based techniques and less expensive than some hardware-based techniques. We study one application, appbt, in detail, including a VHDL-level design of the configurable protocol design. We sketch out approaches for other applications as well. Implementing protocol operations in configurable hardware improves communication performance by roughly 11X for a 32-node system. While overall speedups are a more modest 12% our method is promising because of its flexibility and because it offers a new way of harnessing configurable hardware at the network interface, where it already exists or could be easily added to current systems.